The Bypass button is used to skip arming any open doors or windows and still arm everything else. To do this, leave the door or window open and then press Doors+Windows or Motions.
During the Entry Delay, the panel will announce the open sensor. Press the Bypass button and the panel will announce Sensor Bypassed (eg. Back Door Bypassed). The panel will then arm everything else. You will be able to open and close the door or window as many times as you want without setting off the alarm. To cancel a bypass, simply disarm the panel.
If your system is already armed and the Entry Delay has finished, follow the steps below to bypass a sensor...
If you would like to watch an instructional video, check it out below: