1. The siren has a black and a red wire. These wires go to 2 different locations on the panel
2. These connections are on the inside of the panel. We need to remove the front cover to expose these ports. Simply remove the screw on the top of the panel and pull the back mounting plate off the IQ.
3. The black wire goes to the terminal marked "BUZZER -" and the red wire connects to the terminal next to it marked "BUZZER +".
4. To connect the wires together, follow the instructions below...
A. Twist the black wires together and the red wires together.
B. Place the "B-Connector" on the end of the twisted wires.
C. Take a "Needle Nose Pliers" and squeeze the "B-Connectors" down. This will keep the wires in place.
D. This is what it looks like when completed.
You're done! Feel free to mount the siren indoors or outdoors. When an alarm is triggered on your panel, the external bloodhound siren will sound.
Comments
0 comments
Please sign in to leave a comment.