The IQ Temp Sensor sends a signal to the control panel if temperatures fall below 40°F.
1. Apply the tape to the back of the device and remove the double-sided backing from the tape.
2. Install the sensor in an area where you would like to monitor fluctuating temperatures. The sensor must be within 100-110ft of the control panel.
3. Make sure the device is placed on a clean surface and apply pressure to the device for 10 seconds on the wall.
Freeze Alarm: Temperature drops below 40°F, restore when temperature rises above 45°F.
Sensor: Temperature check every 5 minutes and battery check every hour.
Batteries: Panasonic CR2032, Energizer CR2032, or Duracell DL2032.