Testing GE Wireless ShatterPro Glass Break Sensor(NX488)

Comments

1 comment

  • Avatar
    LiveWatch Security

    Mario,

    During the sensor test I would recommend tampering the sensor by popping the cover off then placing it back on, that will trigger it and you will be able to see the ''packets'' of signal on the panel. 

    The glass break simulators are not really reliable and you generally have to hold it directly to the sensor and  very close to the sensor to put it into the ''test mode'' and then move further back and it should trigger then. This is done when the system is disarmed and not in sensor test mode.

Please sign in to leave a comment.

Phone Support