This is how to verify the cellular signal strength on the Simon XTi control panel. To start, press on the gear wheel in the bottom corner.
Press the down arrow four times.
When you get to the last page press Enter next to Programming.
Enter in 4321 or your regular master code and then press Ok. If you do not do this quickly you may have to start over at the beginning.
Press Interactive Services at the bottom of the page.
Press Module Status.
This page will show you signal strength. You want to have at least 2 bars for a reliable connection.
If you cannot get at least a steady 2 bars you may have to move the panel to a different spot in the house. Press Close and then Module Status again to refresh the signal reading after you move the panel. You may also contact us about trying a different cellular provider that might work better in your area.
If you would like to watch an instructional video, check it out below: