Make sure your system is disarmed during this process. Start by selecting “Settings”
Enter your “Installer Code”, in this case I’m going to use the default which is “1111”
Select “Security Sensors”
Select “Auto Learn Sensor”
At this point, you’ll need to tamper your sensor. To do this, start by removing the casing of the device by pushing-in the tab with a flat blade screwdriver.
Once it's open, the IQ Panel will beep and ask if you want to add the device to your sensor list. Select “OK”
Here you will need to program the proper information for this device.
- Sensor DL ID: Don't touch this option.
- Sensor Type: Select “Door/Window”
- Sensor Name: Select an appropriate name or create a "Custom Description"
- Chime Type: This allows you to apply a specific sound to your device when it’s used.
- Sensor Group: This is used to change the behavior of the device. You can choose “10” if you want an entry delay applied or choose “13” if you want no entry delay applied.
- Voice Prompts: This allows you turn on or off the vocal chime.
When ready, select “Add New”
You’re done! Make sure to re-apply casing for your device.