PIR Motion Test
A PIR Motion Test is a way to test the motion sensor on the front of the Image Sensor. It's good to go through this test when you first mount the Image Sensor to make it's working properly.
Select "Settings" Enter "1111"
Select "System Tests" Select "Image Sensor Config"
Select "Sensor Tests"
Select "Start PIR Test"
Wait a till it finishes the initialization.
It will say "The PIR test is now in progress. For the next three minutes, the Image Sensor's LED should light up every time the PIR is activated."
During the 3 minute period, walk back and forth in-front of the image sensor and the LED will flash whenever it picks up your motion in the room. Make sure you are within 20ft of the Image Sensor during this test.
A Peek-In is a test image that is sent to your alarm.com account for viewing.
Select "Request Peek-In"
Login to your Alarm.com account, select "Image Sensor" and there will be a new image displayed under the gallery. If you don't see it, wait a few minutes and refresh the page.